Index About Contact Links
top banner

neck guard

$90 US
Senior size
$80 US
Junior size

Optional: Add viscoelastic gel for $40 on the stock sized neck guard

neck guard
Bottom view of the neck guard

 

 

Deluxe Neck Guards

PNG1000

A durable neck guard that will last you many years! It features:

- 1000 denier nylon on the neck and top bib to resist skate cuts
- Layered LD and HD foams with HDPE plastic reinforments
- Comfortable airknit bottom
- Easily replaceable strap
- Please note that this is not BNQ certified at this time
- Substitute LD45 with HD airgel for no extra charge
- The neck area can be covered with the following materials:
- Exceed
- Grey Nash
- Neoprene

airgel logo

- When ordering, please specify
1. Your neck size
2. Color preferences for the cordura, jenpro, stitching/velcro, and binding
3. Single or double neck guard
4. LD45 foam or HDairgel (or add viscoelastic gel for an upcharge)
5. Choice of neck material - Exceed, neoprene, or grey nash

The height of the collar can be changed if needed.
The standard is 1.5" in the middle tapering to 2" on the outside

 
 


neck guards

PNG1500

$110 US Senior size only
Optional: Add viscoelastic gel for $45 on the stock sized neckguard

This is the same build as the PNG1000 neckguard but with the following modifications:
- The bib extends 2 1/4" further out
- The sides extend 1" further out

- When ordering, please specify
1. Your neck size
2. Color preferences for the cordura, jenpro, stitching/velcro, and binding
3. Single or double neck guard
4. LD45 foam or HDairgel (or add viscoelastic gel for an upcharge)
5. Choice of neck material - Exceed, neoprene, or grey nash

The height of the collar can be changed if needed. The standard is 1.5" in the middle tapering to 2" on the outside



 

neck guardsneck guards

What makes our design different:

All neckguards feature removable elastic and nylon straps so that you can replace them easily, and there is also the option of added front plate protection with HD foam.

Both feature an inside neck with no seams so that they sit flush and comfortably.

The back is made from lightweight airknit and a custom made exceed/comfort foam lamination. The use of cordura on the entire face helps resist against skate cuts and makes the guard much more durable over time.

It fits better then an "off the shelf neckguard" since the elastic and the collar height are cut to the correct size for your neck and the padding is beefier. You can even have the bib made a different shape to protect further down or off to the sides.

 
 
 
All products, artwork, photography, and web design on this domain are © Sara Marschand 2006-2018. All rights reserved
EQUIPMENT | ACCESSORIES | ARTWORK | IN STOCK | FAQ | TERMS | COLOR CHARTS | PAYMENT | LINKS | CONTACT | ABOUT | HOME
| TESTIMONIALS